TM 5-5420-227-24
Step/Location
Action
Item
Remarks
--
Check launcher components for
1. Launcher
Exterior
dam age.
Remove wrapping, barrier material, --
2. Hull
Hatches
and tape.
Remove wrapping, barrier material, --
Periscope
3. Hull
and tape.
shields
4. Hull
Remove wrapping, barrier material, --
Optical
and tape.
glass
PRELIMINARY SERVICING AND ADJUSTMENT
WARNING
To avoid
Dry Cleaning Solvent P-D-680 is toxic and flammable.
injury, wear protective goggles and gloves and use in a well-ventilated
area. Avoid contact with skin, eyes, and clothes, and do not breathe
vapors. Do not use near open fire or excessive heat. The flash point
for Type I Dry Cleaning Solvent is 100F (38C), and for Type II is
138F (50C). If you become dizzy while using Dry Cleaning Solvent,
get fresh air immediately and get medical aid. If contact with eyes is
made, wash your eyes with water and get medical aid immediately.
1.
If any exterior surfaces of the launcher components are coated with rust preventative
compound, remove the coating with dry cleaning solvent.
Paint the equipment in accordance with unit camouflage requirements.
2.
F o l l o w i n s t r u c t i o n s s p e c i f i e d o n t a g D D F o r m 1397 regarding processing record and
3.
stowage of the vehicle and its equipment if the vehicle is not to be placed into immediate
service. Tag DD Form 1397 will be found in the driver's compartment, attached to the
steering control or transmission shift lever. If the using organization plans to place the
tank into immediate service:
Inventory contents with packing list. Record
a. Open each wooden box and container.
missing items.
b . Check packing list against Basic Issue Items list (BII) in TM 5-5420-226-10 to make sure
all items have been received.
Open inner packs and remove material.
c.
d.
Degrease equipment such as tools and hardware as necessary.
2 - 2 Change 1
