TM 5-5420-227-24
RESERVOIR QUADRANT BLOWER ASSEMBLY REPLACEMENT (Sheet 2 of 5)
Using 1-1/8 inch wrench inside vehicle,
3.
disconnect electrical lead (C) from blower
assembly (D).
4.
Using 3/4 inch socket, remove four screws
(E) and lockwashers (F). Throw lockwashers
(F) away.
Using second technician, lift blower assembly
5.
(G) shock mount (H) and ring (J) from
vehicle.
6.
Using 3/8 inch wrench, remove clamp (K)
from motor silencer (L).
Using one person to support ring (J), use
7.
5/16 inch screw key to-remove six screws
(M) and lockwashers (N). Throw lockwashers
(N) away.
Remove ring (J) from blower assembly (G).
8.
Using flat-tip screwdriver, bend tabs (P) of
9.
silencer (L) away from blower assembly (G).
10.
Remove silencer (L) and ring (J) from
blower assembly (G).
11.
Using putty knife, remove gasket (Q) from
bottom of ring (J) or quadrant (R).
TA170231
Go on to Sheet 3
3-3