TM 5-5420-227-24
CUPOLA COVER REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Manually install bushing (A).
2.
Using hammer as needed, install swing
assembly (B) until firmly positioned
and seated on vehicle in bushing (A).
3.
From inside vehicle, use key to install
screw (C) into swing assembly (B).
4.
With second technician, position cover (D)
on vehicle in closed position.
5.
Using hammer, tap in hinge pin (E).
6.
Using pliers, install two retaining rings (F).
7.
Lock cover (D) in open position.
8.
Place two springs (G) in position on swing assembly (B).
Using pry bar and hammer guide forward eye
9.
(H) of springs (G) into cover eye (J).
Install hatch mount lid (page 3-23).
10.
11.
Install cupola cover handles (page 3-16).
End of Task
TA170237
3-9