TM 5-5420-227-24
BRIDGE SEAT ASSEMBLY REPLACEMENT (Sheet 2 of 4)
Carefully pull hold-down cylinder (H)
5.
toward front of vehicle until cylinder
plug clears bridge seat (E).
6. Care fully lay hold-down cylinder (H) with
attached parts on top deck.
7. Position sling on bridge seat (E) and
attach lifting device.
8. Using 1-1/2 inch socket, remove remaining
six screws (J) and lockwashers (K) securing
bridge seat (E) to vehicle. Throw lockwashers
(K) away.
Using lifting device and two technicians,
9.
guide bridge seat (E) away from
vehicle and lower to resting place.
10. Using 9/16 inch socket, remove 20 nuts
(L), lockwashers (M), and screws (N)
securing two belts (P) to bridge seat
(E). Throw lockwashers (M) away.
11. Remove two belts (P).
TA170272
G O on to Sheet 3
3-44
