TM 5-5420-227-24
BRIDGE SEAT ASSEMBLY REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
Place two belts (A) in position on
1.
bridge seat (B).
2. Manually install 20 screws (C), new
lockwashers (D), and nuts (E) securing
two belts (A) to bridge seat (B).
3.
Using 9/16 inch socket, tighten 20
nuts (E).
4. Position sling on bridge seat (B).
Using lifting device and two technicians, lift bridge seat (B) and place in position on
5.
vehicle.
6.
Using 1-1/2 inch socket, install six shorter screws (F) and new lockwashers (G) securing
left forward, left rear, and right rear bridge seat (B) mounts to vehicle.
7.
Carefully lift hold-down cylinder (H) and push into bridge seat (B).
NOTE
Have second technician support hold-down cylinder (H) while screws are
being installed.
8.
Using 15/16 inch socket, install four screws (J) and new lockwashers (K) securing hold-
down cylinder (H) to bridge seat (B).
TA170273
Go on to Sheet 4
3-45