'TM 5-5420-227-24' by LOGSA

TM 5-5420-227-24

RESERVOIR-TO-PUMP HOSE ASSEMBLY (CV5) R EMPLACEMENT (Sheet 1 of 3)

TOOLS:

7/8 in. open end wrench

1-1/8 in. open end wrench

1-7/16 in. open end wrench

1-3/4 in. open end wrench

12 in. adjustable wrench

Pipe tape (Item 19, Appendix D)

SUPPLIES:

Drip pans

Rags (Item 12, Appendix D)

Masking tape (Item 18, Appendix D)

Pencil

REFERENCE:

PRELIMINARY

PROCEDURE:

Drain hydraulic reservoir (page 3-68)

REMOVAL:

NOTE

Use drip pan and rags to catch hydraulic

fluid trapped in lines. Use masking tape to

tag Iines for installation.

Using 7/8 inch wrench, disconnect hose

assembly "CV5" (A) from elbow (B).

Using 1-1/8 inch wrench to hold bushing (C), use adjustable wrench to remove elbow

(B) and collar (D).

Using 1-7/16 inch wrench to hold check valve (E), use 1-1/8 inch wrench to remove bushing

(C).

Using 1-7/16 inch wrench, remove check valve (E).

Using 1-3/4 inch wrench to hold bushing (F), use adjustable wrench to remove elbow

(G).

Go on to Sheet 2

TA170413

3-188