TM 5-5420-228-24
RESERVOIR QUADRANT BLOWER ASSEMBLY REPLACEMENT (Sheet 3 of 5)
12.
Using 7/1 6 inch wrench to hold four nuts (s),
use 3/16 inch screw key to remove four
screws (T) and five lockwashers (U).
13.
Remove blower assembly (G) from shock
mount (H).
14.
Using cross- tip screwdriver, remove
screw (V) and two lockwashers (W).
15.
Remove ground strap (X).
INSTALLATION:
1.
Place shock mount (A) and ground strap (B)
in position on blower assembly (C).
Manually install four screws (D), five
2.
lockwashers (E), and four nuts (F).
Using 7/16 inch wrench to hold four nuts (F),
3.
use 3/16 inch screw key to tighten four
screws (D) to secure blower assembly (C) and
ground strap (B) to shock mount (A).
Go on to Sheet 4
