TM 5-5420-228-24
CUPOLA BODY ASSEMBLY REPLACEMENT (EARLY MODEL CUPOLA) (Sheet 2 of 3)
With help from second technician,
4.
direct crane operator to lift
cupola body (D) from quadrant (E).
5.
Lower cupola body assembly on to
wooden blocking material.
Using putty knife scrape sealant
6.
from exposed surface of quadrant
(E).
WARNING
Cleaning agent specified is flammable.
Use only in well ventilated areas. Keep
away from flames, sparks, or heat. Do
not smoke while using. Prevent contact
with eyes, mouth, and/or skin. Wear
rubber gloves when performing
cleaning procedures.
Clean all exposed surfaces with
7.
dry cleaning solvent and wipe dry
with cotton rags.
INSTALLATION:
Attach cupola lifting sling to
1.
loops (A).
2.
With help from second technician,
direct crane operator to lift
cupola body so that mating surface
can be inspected.
NOTE
If dirty clean mating surface with
dry cleaning solvent and wipe dry
with cotton rags.
Go on to Sheet 3
