TM 5-5420-228-24
FRONT QUADRANT REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1. Using brush, apply sealant to mating surfaces
of vehicle and quadrant (A).
2. Attach lifting device to handle (B).
3. Have person operating lifting device, slowly
lift quadrant (A) into position over vehicle.
While two technicians guide quadrant (A), have technician operating lifting device slowly
4.
lower quadrant (A) into position on vehicle.
Remove lifting device from handle (B).
5.
Using 3/4 inch socket, install seven screws (C) and lockwashers (D).
6.
Using 1-5/16 inch socket, install six screws (E) and lockwashers (F).
7.
End of Task
TA251447
