TM 5-5420-228-24
BOOM-OUTRIGGER ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 1-5/16 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
Hammer
Lifting device (2000 lb. capacity)
Sling
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Brass drift
SUPPLIES:
Lockwashers (24 required)
Wooden block 10 x 10 in., 3 in. thick
PERSONNEL:
Three
REFERENcE:
LO 5-5420-202-12
PRELIMINARY PROCEDURES:
Remove tongue assembly (page 4-16)
Remove overhead cylinder (page 3-225)
NOTE
Make sure all hydraulic lines are
placed so they will not be damaged
during
boom-outrigger
assembly
removal.
1.
Using 1-5/16 inch socket, remove 24 screws
(A) and lockwashers (B). Throw lockwashers
(B) away.
Go on to sheet 2
TA251671
4-20
