TM5-5420-228-24
Section Il. PUMP-CLUTCH AND VALVE BANK
PUMP-CLUTCH DRIVE REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: 3/4 in. socket with 1/2 in. drive
5" in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Snap ring pliers (inside)
Puller kit
Arbor press
3/8 in. socket head screw key
Wooden block, 1 x 4 in., 3 in. long (make from Item 32, Appendix D)
SUPPLIES:
Dry cleaning solvent (Item 15, Appendix D)
Lockwashers (4 required)
Rags (Item 12, Appendix D)
Gloves (Item 27, Appendix D)
TM 5-5420-202-10
REFERENCES:
Remove universal joint (page 3-62)
PRELIMINARY PROCEDURES:
Remove pump-clutch cover plate (page 3-65)
REMOVAL.:
1.
Place wooden block under clutch (A).
2.
Using screw key, remove setscrew (B).
3.
Using socket, remove four screws (C) and
lockwashers (D). Throw lockwashers (D)
away.
Go on to Sheet 2
TA251674
