TM 5-5420-278-10
0039 00
0039 00-6
BAY RETRIEVAL (Contd)
NOTE
In case of emergency while the RCU is in use, push the
red POWER EMERGENCY STOP switch to shut down
operation of the LHS.
n. Move HIGH IDLE switch (1) to ON and hold HOOK ARM switch (3) in
UNLOAD position until hook arm cylinders (5) are extended approximately
6 in. (15 cm), then release switch (3).
o. Hold MAIN FRAME switch (4) in UNLOAD position until main frame (8) is
fully extended, then release switch (4).
p. Hold HOOK ARM switch (3) in UNLOAD position until cable hook (6) can be
reached from ground, then release switch (3).
WARNING
Always wear leather gloves when handling winch cable.
Failure to comply may result in injury to personnel.
q. While assistant maintains tension on winch cable (7), hold WINCH
switch (2) in OUT position until winch pays out approximately 8 ft (2.4 m) of
cable (7), then release switch (2).
r. Hold HOOK ARM switch (3) to load position until hook arm cylinders (5) are
returned to approximately 6 in. (15 cm), then release switch (3).
s. Move HIGH IDLE switch (1) to OFF position.
3
2
4
7
6
8
