TM 5-5420-278-24&P0023 000023 00-4INNER PONTON AND OUTER PONTON SEPARATION (Contd)5.Remove two cotter pins (4) and washers (3) from pin (15), and drive pin (15) out from cover (1) andbellcrank (11). Discard cotter pins (4).6.Remove two locknuts (7), screws (12), and connecting links (2) with cover (1) from inner pontonbrackets (8). Discard locknuts (7).7.Remove locknut (14) and screw (6) from front collar (5), drive bellcrank (11) forward, and removecollar (5) from bellcrank (11). Discard locknut (14).NOTENote location and quantity of shims for installation.8.Drive bellcrank (11) completely out of inner ponton hinges (13) and (10), and remove shims (9).9.Remove locknut (19), screw (20), and rear collar (18) from pin (17). Discard locknut (19).10.Drive pin (17) out of inner ponton hinges (21) and (16).WARNINGAll personnel must stand clear during lifting operations. Ensureponton foldlocks and travel latch are in good mechanical conditionand securely locked prior to lifting bay. Failure to comply mayresult in damage to equipment or injury to personnel.11.Unlock travel latch (23), and lift and separate inner pontons (22) using lifting device. 12.Set inner ponton (22) and outer ponton (24) down, with roadway surface (25) of inner ponton (22) on dunnage.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
