TM 5-5420-278-24&P
0047 00
0047 00-2
ACCESS COVER REPLACEMENT (Contd)
REMOVAL
NOTE
Inner ponton has four access covers, and they are removed and
installed the same way.
1.
Remove ten screws (7) and washers (6) from inner ponton (1) and access cover (2).
2.
Turn access cover (2) and remove access cover (2) from inside of inner ponton (1).
3.
Remove gasket (5) from front of access cover (2). Discard gasket (5).
4.
If necessary, remove screw (3) and handle (4) from access cover (2).
5.
Repeat steps 1 through 4 to remove other access covers (2).
INSTALLATION
1.
If removed, install handle (4) on access cover (2) with screw (3).
2.
Apply adhesive to new gasket (5) and install gasket (5) on access cover (2).
3.
Install access cover (2) with gasket (5) inside of inner ponton (1) and turn access cover (2).
4.
Align holes in access cover (2) with holes in inner ponton (1) and install ten washers (6) and
screws (7) on inner ponton (1) and access cover (2).
5.
Repeat steps 1 through 4 to install other access covers (2).
