TM 5-5420-278-24&P
0046 00
0046 00-2
FOLDLOCK REPLACEMENT (Contd)
NOTE
Removal and installation of foldlocks on left and right sides are
performed the same way. Left side is shown.
REMOVAL
1.
Move lever (1) to latched position (TM 5-5420-278-10).
2.
Remove two springs (4), spacers (5), and pin (6) from inner ponton brackets (7) and pin (3).
3.
Remove two cotter pins (10), washers (9), pin (8), and lever (1) from inner ponton brackets (7).
Discard cotter pins (10).
4.
Remove two spring pins (2) and pin (3) from lever (1).
INSTALLATION
1.
Apply a light coat of grease to pins (3), (6), and (8).
2.
Position pin (3) on lever (1), and install two spring pins (2) on pin (3).
3.
Install lever (1) on inner ponton brackets (7) with pin (8), two washers (9), and new cotter
pins (10).
4.
Move lever (1) to latched position (TM 5-5420-278-10).
5.
Position pin (6) and two spacers (5) on inner ponton brackets (7), and install two springs (4) on
pins (6) and
5
6
1
2
3
4
7
10
9
8
END OF WORK PACKAGE