TM 5-5420-278-24&P
0072 00
0072 00-4
CYLINDER MAINTENANCE (Contd)
CLEANING AND INSPECTION
WARNING
Skysol-100 mixture is combustible. Use mechanical ventilation
whenever product is used in a confined space, is heated above
ambient temperatures, or is agitated. DO NOT use or store near
heat, sparks, flame, or other ignition sources. Keep container
sealed when not in use.
Contact with Skysol-100 may cause skin irritation. Use chemical-
resistant gloves. In case of skin contact, remove any contaminated
clothing and wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may cause
irritation, tearing, or blurring of vision. Use face shield or goggles
when eye contact may occur. In case of eye contact, flush eyes
with large amounts of water for at least fifteen (15) minutes or
until irritation subsides. Inhalation may cause irritation to upper
respiratory passages. DO NOT have food or drink in the vicinity.
1.
Clean all cylinder parts with Skysol-100 and dry with lint-free cloth before inspection.
2.
Inspect piston bore (1) in cylinder housing (2) for nicks, scratches, cracks, scoring and
excessive wear.
3.
Inspect piston rod bore (3) in cylinder housing (2) for nicks, scratches, cracks, scoring, or excessive
wear.
4.
Inspect piston rod bore (6) in cylinder end yoke (5) for nicks, scratches, cracks, scoring, or
excessive wear.
5.
Inspect diameter of mounting pin bore (4) in cylinder end yoke (5).
6.
Inspect piston (7) and O-ring groove (8) for nicks, scratches, cracks, scoring, or excessive wear.
7.
Inspect diameter of mounting pin bore (10) in piston rod (9).
8.
Inspect bushing (11) for nicks, scratches, cracks, scoring, or excessive wear.
9.
Inspect all threads for damage or wear.
