TM 5-5420-278-24&P
0074 00
ILLUSTRATED LIST OF MANUFACTURED ITEMS (Contd)
0074 00-3
NOTE:
Use existing tab and keyring. If desired, the complete cable assembly is available
by part number 909667501 (D9913).
PROCEDURE:
1. Cut wire rope (LT1504-C6-10) or equivalent 0.125 in. (3.2 mm) diameter
to 1 ft 2 in. (35.6 cm) in length.
2. Slide two swaging sleeves (part number M551844-1) (96906) on wire rope and
route ends through tab (part number 13219E4269) (97403), keyring (part
number 027074-002) (D9913), and back through clamps.
3. Crimp two swaging sleeves on wire rope.
ITEM 2. RAFTING BRACKET QUICK-RELEASE PIN RETAINER ASSEMBLY
KEYRING
WIRE ROPE
0.125 in. (3.2 mm DIAMETER)
TAB
1 ft (2.5 cm)
SWAGING SLEEVE