TM 5-5420-278-24&P
0074 00
ILLUSTRATED LIST OF MANUFACTURED ITEMS (Contd)
0074 00-4
NOTE:
One per bilge plug is required. Use existing bilge plug and clasp. If desired, the
complete assembly is available by part number 027007314 (D9913) and 027007313
(D9913).
PROCEDURE:
1. Cut wire rope (part number 909667518) (D9913) to 2 ft 5 in. (73.2 cm) in
length.
2. Slide two swaging sleeves (part number M551844-1) (96906) on wire rope and
route ends through clasp (part number 027013404) (D9913), bilge plug (part
number 027017302 (D9913) or 027017301) (D9913), and back through swaging
sleeves.
3. Crimp two swaging sleeves on wire rope.
ITEM 3. BILGE PLUG RETAINER ASSEMBLY
SWAGING SLEEVE
1.3 in.
(32 mm)
0.7 in.
(17.5 mm)
0.7 in.
(17.5 mm)
WIRE ROPE, 0.125 in. (3.2 mm DIAMETER)
CLASP
BILGE PLUG
1.3 in.
(32 mm)
2 ft
(61 cm)