TM-5-5420-279-10
3.5.1.9
Check that the following lamps are lit:
E Stop Reset
On Controller Status
Reset
Launcher Control Healthy
On Supplies Status
On Launcher Deployment Controls
Vehicle Supply
A-frame Fold
Controller
Parked
Crane
A-Frame Rotate
Bridge Deployment
Launcher Down
Tail lift
On Vehicle Status (at the top of panel)
Launcher Deployment
Neutral Selected
Brake Applied
3.5.1.10
Press the EMERGENCY STOP RESET button. Ensure that none of the lights on the E-
Stop status panel, at the top left of the main panel are illuminated, or, if illuminated that
they go out. If any of the emergency status light do not extinguish check the E-Stop
status panel for their location and release any emergency stop buttons that are engaged.
3.5.1.11
Ensure the following lights come on after pushing the E-STOP RESET button:
On Launcher Deployment Controls
On Bridge Build Select
Launcher Deploy
A-Frame Fold
Parked
PTO Engaged at Pressure
A-Frame Rotate
Launcher Down
5 second delay after
Neutral Lock Up
comes on
Pump running along with the hours meter
2 second delay after
Fast Idle
running
Neutral Lock Up
comes on
2 second delay after
Tail lift Supply
Fast Idle comes on
Launcher Deployment
3.5.1.12
Remove left and right hand mudguard extensions by removing the R clips from the front
securing peg and from the rear shootbolt, retract the shootbolt.
3.5.1.13
Remove the mudguards and stow clear of the vehicle.
3-39