TM-5-5420-279-10
FUNCTION
SELECT
TILT
ROLLER
CARRIAGE
STOW
EMPTY
HIGH
BANK
BEAM
A FRAME
BEAM
STOW
=LEVEK
L
FARBANK
MODE
TOP
BRIDGE
DRIVE
RAISE
ANGLE
ARTIC
BAN
SEAT
SELECT
WINCH
LIFT
LOW
EMERGENCY STOP
POWER
BANK
ROLLER
BRIGHT
OFF
FAULT
BRAKE
OFF
ON
DIM
OFF
ROLLER BRAKE
PUSH TO STOP - TWIST TO RESET
686A356b
Beam Drive Caption
4.7.2.7
On the chest pack, move the joystick forward and rearward as necessary to release
the locking pin.
4.7.2.8
Position the pinning operatives in the shelter of the launch frame during slinging
operations.
4.7.2.9
Ensure lifting sling is vertical in both directions.
WARNING
CRUSH HAZARD. THE LOAD MAY FALL FROM THE CRANE, IF A LOAD IS LIFTED
WITHOUT FIRST ENSURING THAT THE LIFTING SLINGS ARE CENTERED OVER THE
LOAD IN BOTH DIRECTIONS. FAILURE TO HEED THIS INSTRUCTION COULD LEAD TO
DEATH OR SERIOUS INJURY TO PERSONNEL.
4.7.2.10
Operate the lift and traverse controls on the crane and, using the tag lines, locate the
next launch beam module into position at the launch frame.
4.7.2.11
Position the suspended launch beam module to align its upper jaws with those of the
module held in the launch frame.
4-36