TM-5-5420-279-10
BRIDGE MODULE RAMP PUSH/PULL SLING
10.13.1.1
This task covers:
a. Removal
b. Service/repair
c. Installation
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK).
Materials Required
Thread-locking compound Loctite 243.
Equipment Conditions
None.
10.13.3.1
Remove the two bolts and washers securing the bracket to the bridge module.
10.13.3.2
Remove the bracket.
10.13.3.3
Remove the sling.
10.13.4.1
Check the sling for wear and damage.
10.13.4.2
Check the bolts and washers for damage.
10.13.4.3
Change components as required.
10.13.5.1
Place the bracket over the sling.
10.13.5.2
Apply thread-locking compound to the bolt threads.
10.13.5.3
Fit the bracket to the bridge module with the bolts and washers.
NOTE
Make sure that the bracket does not trap the sling when tightening the bolts.