TM-5-5420-279-10
10.26.1.1
This task covers:
a. Fitting
b. Service/repair
c.
Removal
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK).
Materials Required
Wooden buffer .
Qty. 2 bolts, qty. 4 washers, qty 2 nuts.
Equipment Conditions
Not in use, with no bridge modules loaded.
10.26.3.1
Place one washer (3) over bolt shaft (2).
10.26.3.2
Insert one bolt (2) and washer (3) into holes at both ends of wooden buffer (1).
10.26.3.3
Put wooden buffer (1) into position, and locate protruding bolt shafts (2) into holes in
flatrack tool box support.
10.26.3.4
Have one person hold the wooden buffer (1) in position.
10.26.3.5
Place washer (3) and nut (5) over bolt shaft (2) inside box section of tool box
support.
10.26.3.6
Finger tighten nut (5).
10.26.3.7
Repeat for bolt (2) at other end of wooden buffer (1).
10.26.3.8
Using a suitable wrench fitted to the nut (5) and a suitable socket wrench fitted to the
bolt head (2), tighten the nut (5) and bolt (2).
10.26.4.1
Check all components for wear and damage.
10.26.5.1
Using a suitable wrench fitted to the nut (5) and a suitable socket wrench fitted to the
bolt head (2), loosen the nut (5) and bolt (2) until they are finger tight.