TM-5-5420-279-10
10.35.1 Coverage
10.35.1.1
This task covers:
a.
Removal
b.
Install
Tools Required
BII wrench.
Allen key Set
Materials Required
Nyloc Nuts (Qty 14).
Equipment Conditions
Tail Lift Deployed.
10.35.3 Remove
10.35.3.1
Remove the 14-nyloc nuts (4) and washers (3) securing the buffer pad (5) to the tail
lift cradle (1).
10.35.3.2
Discard the nyloc nuts (4).
10.35.3.3
Remove and retain the 14 screws (2).
10.35.3.4
Remove the buffer pad (5)
10.35.4 Install
10.35.4.1
Ensure the tail lift cradle (1) is clean.
10.35.4.2
Place the buffer pad (5) on the tail lift cradle (1).
10.35.4.3
Secure the buffer pad (5) to the tail lift cradle (1) with the 14 screws (2), washers (3)
and new nyloc nuts (4).
10.35.5.1
Stow the tail lift.
