TM-5-5420-279-10
7
8
VIEW ON TAIL LIFT
686A682
WARNING
UNEXPECTED MOVEMENT OF EQUIPMENT. KEEP WEIGHT ON FAR BANK SUPPORT
WHEN RELEASING STRAPS TO CONTROL SWINGING.
FAILURE TO HEED THIS
INSTRUCTION COULD LEAD TO INJURY OF PERSONNEL.
9
Remove the far bank support transport straps and slowly allow the far bank
support to swing vertical.
10 Remove the far bank bearing pads.
11 Using the Tail lift, lift/lower the Far Bank Support, with 2 average sized personnel
supporting the Far Bank Support in the upright position.
12 Use a crane with lifting slings to support the weight (436lbs (198kg)) of the Far
Bank Support.
13 Remove two 8 mm screws and the pivot pin retaining plate.
WARNING
CRUSH HAZARD. NEVER USE FINGERS TO PUSH PINS IN OR OUT OF HOLES. SERIOUS
PERSONAL INJURY WILL RESULT IF THIS INSTRUCTION IS NOT OBSERVED.
11-40
