TM 5-5420-280-10
0007 00
PALLET CONTROLS AND INDICATORS (Contd)
X
SUPPORTING CYLINDER HAND-OPERATED WINCH -- To operate
winch, remove ratchet from tool box and connect it to winch drive socket. To
lower supporting cylinder, set rotation direction of ratchet by moving lever to
L position, and slowly turn ratchet to the left until weight of cylinder is off
winch strap. To raise supporting cylinder, move ratchet lever to R position,
and turn ratchet to the right until cylinder is fully raised.
Y
SUPPORTING CYLINDER RETAINING PINS -- The retaining pins are
removed by turning pin until tang clears hook or slot in bracket, and pulling
pin from hole.
X
WINCH
DRIVE
SOCKET
RATCHET
TANG
Y
HOOK
Y
X
TANG
LEVER
0007 00-10
