TM 5-5420-280-10
0022 00
TRANSPORT OF PALLET ON GROUND (Contd)
NOTE
If pallet will be stowed on ground for an extended
period of time or pallet is loaded on aircraft, support
wheels should be raised. Perform step 6.
Placing dunnage under pallet frame is recommended if
pallet will be stowed on ground for an extended period
of time.
It may be necessary to momentarily lower the steering
and fixed axles fully down in order to remove retaining
pins.
6. Raise fixed axles (2) and steering axles (1) (lower pallet to ground) as follows:
a.
Position selector valve lever (6) in POSITION 1 or pointing left of center,
and move control valve lever (3) to POSITION A or left of center.
b.
Install pump handle on pump lever (4) and operate hydraulic pump (5)
until steering axles (1) are fully raised (pallet is lowered to ground).
3
PUMP
HANDLE
6
2
4
5
1
LEFT FIXED AXLE SHOWN
END OF WORK PACKAGE
0022 00-6
