TM 5-5420-280-10
0043 00
Preventive Maintenance Checks and Services (PMCS) for Pallet (Contd).
NOT FULLY
ITEM
ITEM TO
INTERVAL
PROCEDURE
MISSION
NO.
CHECK/SERVICE
CAPABLE IF:
13
Before
Supporting
Check for damage, cracks, or missing
Supporting cylinder
cylinder bottom
pin.
bottom plate is
plate (1)
damaged or pin is
missing.
14
Before
Supporting
a. Check for damaged or missing
a. Retaining pins
cylinder (2),
retaining pins.
are missing or
winch (10),
damaged.
strap (7),
retaining
b. Strap or strap pin
b. Check for damaged or missing hand
pins (9), and
is damaged or
winch strap or strap pin.
roller (8)
missing.
c. Ratchet is not
operational.
looseness or damage using BII ratchet.
d. Lines, hoses, or
d. Check hydraulic hoses, fittings, and
fittings are
lines for damage or leaks.
damaged, or Class
III leak is noted.
e. Roller is damaged
e. Check for damaged roller.
or will not turn.
15
Before
Supporting
a. Check supporting wheel and
wheel (3),
retaining bracket for damage or missing
tire (6),
hardware. Spin wheel to ensure it
hydraulic
rotates freely.
cylinders (4),
and retaining
b. Check tire for cuts, cracks, or
bracket (5)
deflation. Check tire pressure and add
air as necessary; fill to 100 psi
(690 kPa)
c. Check hydraulic cylinders for loose or
missing hardware.
d. Check hydraulic cylinders, lines, and
d. Any Class III leak
fittings for leaks, or if tubing is kinked
is noted or faulty
or damaged.
cylinders prevent
transload or
transport of pallet
on ground.
0043 00-8
