TM 5-5420-280-23&P
0031 00
PALLET BRIDGE REMOTE CONTROL LEVER RELEASE REPLACEMENT (Contd)
ADJUSTMENT
1. Using torque wrench, check for 5274 lb-ft (70100 Nm) pressure to trip pivot bracket (3) by
trigger (12).
NOTE
Note position and quantity of spring washers for installation.
2. If necessary, remove locknut (8), washer (7), shoulder bolt (10), and spring washers (9), add spring
washers (9) to increase pressure or remove spring washers (9) to decrease pressure.
3. Position spring washers (9) as required on shoulder bolt (10) and install on trigger support
bracket (6) with washer (7) and new locknut (8).
4. Repeat steps 1 through 3 if torque is not within limits.
3
2
1
9
3
22
12
23
21
4
20
6
5
7
8
19
18
9
10
11
12
13
17
14
15
16
END OF WORK PACKAGE
0031 00-3/4 blank
