TM 5-5420-280-23&P
0040 00
PALLET RETAINING PINS REPLACEMENT (Contd)
REMOVAL
NOTE
Removal and installation of all retaining pins are performed the
same way. Right supporting cylinder retaining pin is shown.
1.
Turn retaining pin (3) to unlock position and remove retaining pin (3) from bracket (1) and lock
pin (7).
2.
Remove screw (2), retaining pin (3), and lanyard (6) from bracket (1).
3.
Remove lanyard (6) from ring clip (5).
4.
Remove ring clip (5) from retaining pin handle (4).
5.
If damaged, remove lock pin (7) from bracket (1).
INSTALLATION
1. If removed, install lock pin (7) on bracket (1).
2.
Install ring clip (5) on retaining pin handle (4).
3.
Install lanyard (6) on ring clip (5).
4.
Install lanyard (6) with retaining pin (3) on bracket (1) with screw (2).
5.
Install retaining pin (3) on bracket (1) and turn to lock position.
1
2
3
7
4
5
6
END OF WORK PACKAGE
0040 00-2
