TM 5-5420-280-23&P
0078 00
FRONT EXPANDING CYLINDERS HYDRAULIC FLOW DIVIDER, MAIN EXPANDING CYLINDERS
HYDRAULIC FLOW DIVIDER, REAR EXPANDING CYLINDERS HYDRAULIC FLOW DIVIDER,
FORWARD SUPPORT WHEEL CYLINDERS FLOW DIVIDER, AND REAR SUPPORT WHEEL CYLINDERS
FLOW DIVIDER REPLACEMENT (Contd)
REMOVAL
g. Forward Support Wheel Cylinders Flow Divider
1.
Loosen nut (6) and remove steel tube (5) and tube seal (4) from adapter (3) on flow divider (10).
Discard tube seals (4).
2.
Loosen nut (16) and remove steel tube (15) and tube seal (4) from adapter (17) on flow divider (10).
Discard tube seals (4).
3.
Loosen nut (13) and remove steel tube (14) and tube seal (4) from elbow (12) on adapter (11) on flow
divider (10).
4.
Remove elbow (12) from adapter (11).
5.
Remove three locknuts (9), washers (18), screws (1) washers (18), and flow divider (10) from
crossmember (7). Discard locknuts (9).
6.
Remove adapters (3), (11), and (17), and three O-rings (2) from flow divider (10). Discard O-rings (2).
INSTALLATION
NOTE
Apply a light coat of hydraulic oil to O-rings at installation.
The pallet hydraulic system is self-bleeding, and with exception of
the telescopic tube hydraulic cylinders, there is not requirement for
bleeding air from the system.
h. Forward Support Wheel Cylinders Flow Divider
1.
Install three new O-rings (2) and adapters (4), (11), and (17) on flow divider (10).
2.
Install flow divider (10) on crossmember (7) with three washers (18), screws (1), washers (8), and
new locknuts (9).
3.
Install elbow (12) on adapter (11).
4.
Install new tube seal (4) and steel tube (13) on elbow (12) on flow divider (10) and tighten nut (13).
5.
Install new tube seal (4) and steel tube (15) on adapter (17) on flow divider (10) and tighten nut (16).
6.
Install new tube seal (4) and steel tube (5) on adapter (3) on flow divider (10) and tighten nut (6).
1
18
4
3
2
4
5
16
2
17
15
6
14
7
13
10
2
4
11
12
8
9
0078 00-7
