TM 5-5420-280-23&P
0078 00
FRONT EXPANDING CYLINDERS HYDRAULIC FLOW DIVIDER, MAIN EXPANDING CYLINDERS
HYDRAULIC FLOW DIVIDER, REAR EXPANDING CYLINDERS HYDRAULIC FLOW DIVIDER,
FORWARD SUPPORT WHEEL CYLINDERS FLOW DIVIDER, AND REAR SUPPORT WHEEL CYLINDERS
FLOW DIVIDER REPLACEMENT (Contd)
INSTALLATION (Contd)
f.
Front Expanding Cylinders Flow Divider
1.
Install three new O-rings (8), fitting (7), and two fittings (11) on front flow divider (5).
2.
Install two elbows (14) on fittings (11) and tighten nuts (15).
3.
Install front flow divider (5) and new tube seal (6) on steel tube (3) from main flow divider (4) and
bracket (1) with three washers (10), screws (9), washers (18), and new locknuts (19) and tighten
nut (2) on steel tube (3) from main flow divider (4).
4.
Install two new tube seals (6) and steel tubes (12) and (17) on elbows (14) of front flow divider (5)
and tighten nuts (13) and (16).
5.
Install bridge halves on bridge pallet. Refer to WP 0018 00.
3
2
4
1
5
19
6
18
7
8
8
11
8
10
17
9
11
16
6
15
14
14
6
12
13
0078 00-6
