TM 5-5420-280-23&P
0044 00
PALLET BRIDGE SUPPORT ROLLERS REPLACEMENT (Contd)
REMOVAL
NOTE
Removal and installation of pallet bridge support rollers are
performed the same way. Left support roller is shown.
Note quantity of shim(s) for installation.
1.
Remove four screws (4), lockwashers (5), support roller brackets (6), and shims (7) from top of pallet
frame member (8). Discard lockwashers (5).
2.
Slide end support brackets (6) off roller shafts (3).
3.
Slide roller shaft (3) out of roller (2).
4.
If damaged, press two bushings (1) out of roller (2). Discard bushings (1) if removed.
INSTALLATION
1. If removed, press two new bushings (1) on roller (2).
NOTE
Apply a light coat of grease to bushings and roller shaft at
installation.
2.
Install roller shaft (3) on roller (2).
3.
Install end support brackets (6) on roller shaft (3).
NOTE
Ensure that all mounting hardware is tightened to metric
standards unless otherwise noted. Refer to metric torque limits in
Install same number of shim(s) as noted at removal.
4.
Install shims (7) and support roller brackets (6) on pallet frame member (8) with four new
lockwashers (5) and screws (4).
1
2
1
4
3
5
6
7
8
END OF WORK PACKAGE
0044 00-2