TM 5-5420-280-23&P
0046 00
PALLET ANCHORING STOWAGE BOX REPLACEMENT (Contd)
REMOVAL
NOTE
Both pallet anchoring stowage boxes are replaced the same. Only
one stowage box is shown.
1.
Remove two nuts (14), washers (13), screws (8), lanyards (9), and retaining pins (10) from pallet
anchoring stowage box (1).
2.
If damaged, remove locking pin(s) (11) from brackets (12) or (17).
3.
Remove four washers (16), screws (15), and two brackets (17) from stowage box (1).
4.
Remove four screws (18), washers (19), and two handles (2) from stowage box (1).
5.
Remove four screws (7) and two latches (6) from stowage box (1).
6.
If damaged, remove four rivets (5) and two catches (4) from stowage box cover (3). Discard rivets (5).
INSTALLATION
1. If removed, install two catches (4) on stowage box cover (3) with four new rivets (5).
NOTE
Ensure that all mounting hardware is tightened to metric
standards unless otherwise noted. Refer to metric torque limits in
2.
Install two latches (6) on stowage box (1) with four screws (7).
3.
Install two handles (2) on stowage box (1) with four washers (19) and screws (18).
4.
Install two brackets (17) on stowage box (1) with four screws (15) and washers (16).
5.
If removed, install locking pin(s) (11) on brackets (12) or (17).
6.
Install two lanyards (9) with retaining pins (10) on to stowage box (1) with two screws (8), washers
(13), and nuts (14).
7.
Install stowage box on bridge pallet. Refer to TM 5-5420-280-10.
8.
Install all anchoring tools in stowage box. Refer to TM 5-5420-280-10.
0046 00-2
