TM 55-1945-205-10-2
0019 00 2
0019 00
WARNING
Beware of other craft or objects coming alongside while working outboard installing
the keeper plate and bolt on deck fittings, as the possibility exists of falling
overboard. Failure to observe these precautions could result in death
or injury to personnel.
2. Insert bolt (3) through keeper plate (4) and module (2).
3. Run bolt (3) down into threaded portion of deck fitting (1) and tighten.
4. Insert stanchion (5) in deck fitting (1) and align holes (6) located near the base.
5. Insert attached toggle pin (7) through holes (6).
4
3
2
7
5
6
1
11
