TM 55-1945-205-10-2
0020 00 3
0020 00
:,1*
e.
Apply a thin coating of antiseize compound to ground cable terminal.
f.
Install flat washer (5), lock washer (4) and nut (3) on ground stud (2)
g.
Tighten ground stud nut (3).
3.
Attach generator ground cable C-clamp (6) to module deck ISO fitting (7).
:,1*
a.
Remove paint from ISO fitting (7) so grounding surface has a smooth, bright finish. Use a wire brush.
:,1*
b.
Apply a thin coating of antiseize compound to ISO fitting (7) grounding surface.
:,1*
c.
Clean C-clamp (6) grounding surface. Use a wire brush.
d.
Attach grounding clamp (6) to module ISO fitting (7).
