TM 55-1945-205-10-2
0003 00 14
0003 00
DUNNAGE MATS
Location
Individual dunnage mats are attached to a module ISO corner fitting and are placed where the cargo ramps of the
sealift vessel and the lighters will land on the RRDF. When not in use, the mats are stacked horizontally on a pallet in
the 20 ft ISO storage containers.
Description
Each dunnage mat is approximately 4 ft wide, 10 ft long and 1½ in. thick and made of high density polyethylene
material. Each mat weighs 300 lbs and has a hole near each corner that is used for securing the mat to the ISO
corner fittings.
D-RING/CLOVERLEAF FITTINGS AND DECK CLEAT FITTINGS
Location
The D-ring/cloverleaf fittings and deck cleat fittings are installed in the module turn tubes located on the deck of the
RRDF platform.
Description
These fittings have a 15,000 lb load capacity. There are ten tube turns per center module and five per end rake.
DECK CLEAT
D -RING/CLOVERLEAF
