TM 55-1945-205-10-2 0114 00 39 0114 00 15 After .1 Lift Shackles Remove water from lift shackles. Lubricate lift shackles using general purpose grease and a hand lubricating gun. 16 After 1.0 Flexors 1. Inspect uninstalled flexors for separation of the polyurethane material in the center. If found, the flexor must be replaced. Separation of the polyurethane material in the center of the flexor is found. 2. Inspect uninstalled flexors for cracks in the external weldments on the ends. If found, the flexor must be replaced. Cracks are discovered in the external weldments on the ends of the flexor. 17 After .4 Non-Powered Modules Inspect modules for broken welds, cracks, punctures and corrosion. If found, contact unit maintenance. Inspect all non-powered modules for major deformation. If major deformation or leaks are found, contact unit maintenance. Broken welds, cracks or punctures are present. Major deformation is found. Table 1.  Preventive Maintenance Checks and Services. (Continued) ITEM NO. INTERVAL MAN- HOURS ITEM TO BE CHECKED OR SERVICED PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: CLEAT LIFT SHACKLE POLYURETHANE SECTION METAL END METAL END