TM 55-1945-205-10-2
0114 00 46
0114 00
21
Monthly
5.0
Module Interlock
Connector (Male
Locking Pin)
1. Check male connector pin for
deformation, twisting, bending and
flatness. If any deformation of the
pin is present, remove pin from
service. Contact unit maintenance.
Any deformation of
the pin is present.
2. Check contact area where the pins
seat against the guillotine bars for
wear. If excessive wear is present,
remove pin from service. Contact
unit maintenance.
Excessive wear is
present.
3. Check the pin to ensure stop bar is
attached. If stop bar is removed,
remove pin from service and replace
stop bar. Contact unit maintenance.
If stop bar is
removed.
4. Check the connector pin for
cracks and/or unusual damage
(missing material, notches, etc.) If
any cracks and/or unusual damage is
present, remove pin from service.
Contact unit maintenance.
If any cracks and/or
unusual damage is
present.
WARNING
3
Quarterly
1.0
Generator Container Lubricate generator container door
hinges. Lubricate with grease, MIL-
G-81322. Grease by hand.
WARNING
4
Quarterly
.5
Personnel Shelter
1. Lubricate personnel shelter door
hinges. Lubricate with grease,
MIL-G-81322. Grease by hand.
Table 1. Preventive Maintenance Checks and Services. (Continued)
ITEM
NO.
INTERVAL
MAN-
HOURS
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
