Table 1. Preventive Maintenance Checks and Services. (Continued)

Table 1. Preventive Maintenance Checks and Services. (Continued) - TM-55-1945-205-10-4_459

Table 1. Preventive Maintenance Checks and Services. (Continued) - TM-55-1945-205-10-4_461

TM-55-1945-205-10-4 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
376

TM 55-1945-205-10-4 0099 00 20 0099 00 8 Before .5 Offshore Anchor Mooring System (Cont’d) 3. Check lever hoist rachets for proper operation loose or missing hardware and corrosion.If corrosion, damaged or missing hardware is discovered or ratchet does not operate properly, contact unit maintenance. 4. Check anchor stabilizers for cracks, corrosion and elongated bolt holes. If cracks, corrosion or elongated bolts holes are found contact unit maintenance. 5. Check anchor buoy for punctures that would affect buoyancy. If punctures are found contact unit maintenance. a. Inspect metallic parts of buoy for excessive wear, corrosion and distortion. If excessive wear, corrosion or distortion are found contact unit maintenance. b. Inspect buoy shackle for excessive wear, corrosion and distortion. Check to see that cotter pins are correctly installed. If excessive wear, corrosion or distortion is found or cotter pins are missing or improperly installed, contact unit maintenance. 9 Before .05 Mooring Bitts Check for cracked, loose or damaged mooring bitts. If cracks, loose or damaged mooring bitts are found contact unit maintenance. Table 1. Preventive Maintenance Checks and Services. (Continued) ITEM NO. INTERVAL MAN- HOURS ITEM TO BE CHECKED OR SERVICED PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF:

Privacy Statement
Press Release
Contact