TM 55-1945-205-24-2
0324 00 2
0324 00
INSPECT PULSE LIMITER
NOTE
If excessive carbon deposits are found, the engine should be checked for other
causes of backfiring.
1.
Inspect exterior of pulse limiter (3) for cracks in plastic and metal housings. If damage is found, replace
pulse limiter.
2.
Inspect the inside of the pulse limiter (3) for carbon deposits.
CLEAN CARBON FROM PULSE LIMITER
WARNING
1.
If excessive carbon is found, backflush pulse limiter (3) with carbon removing compound (6).
2.
If carbon cannot be removed with carbon removing compound, replace pulse limiter.
3.
If engine still backfires, perform troubleshooting procedures. (WP 0048 00)
INSTALL PULSE LIMITER
1.
Install clamp (1) and hose (2) on pulse limiter (3) with metal end of pulse limiter toward powerhead.
2.
Install pulse hose (5) and clamp (4) on pulse limiter (3).
3.
Install RHIB engine cover. (WP 0297 00)
4.
Install RHIB battery negative lead terminal. (WP 0336 00)
5.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
3
6
