TM 55-1945-205-24-2
0325 00 1
0325 00
DIRECT SUPPORT MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
RIGID HULL INFLATABLE BOAT ENGINE VRO
PUMP FUEL SYSTEM
TESTING
INITIAL SETUP:
Tools
Tool Kit, General Mechanic’s (Item 81, WP 0359 00)
Gloves, Chemical (Item 25, WP 0359 00)
Goggles, Industrial (Chipping, Chemical) (Item 28, WP 0359 00)
Respirator, Air Filtering (Item 59, WP 0359 00)
Tester, Gage, Vacuum (Item 77, WP 0359 00)
Gage, Fuel Pressure (Item 20, WP 0359 00)
Drum, Shipping and Storage (Test Tank) (Item 17, WP 0359 00)
Propeller, Marine (Test) (Item 50, WP 0359 00)
Materials/Parts
Rag, Wiping (Item 45, WP 0358 00)
Tubing, Nonmetallic, ¼ in. 8 in. long (Item 58, WP 0358 00)
Personnel Required
Engineer 88L
References
TM 55-1945-205-10-2
Equipment Condition
RHIB Dry-Docked.
Engine Cover Removed. (WP 0297 00)
TEST RHIB ENGINE VRO FUEL PUMP FUEL SYSTEM
WARNING
During the following procedure a test propeller must be installed on the engine and
the engine must be placed in a test tank. Failure to comply may result in injury to
personnel and damage to equipment.
NOTE
The following procedures test the VRO pump fuel system for proper siphoning
and output pressure.
1.
Start and warm up RHIB engine to normal operating temperature. (TM 55-1945-205-10-2)
2.
Shut down RHIB engine. (TM 55-1945-205-10-2)
