TM 55-1945-205-24-2
0329 00 2
0329 00
WARNING
2.
Unscrew in line fuel filter cover (2) from in line fuel filter base (3) to expose in line fuel filter element (4).
CLEAN IN LINE FUEL FILTER
1.
Remove debris from the in line fuel filter element (4) by tapping against the wiping rag.
2.
Clean the inside of the in line fuel filter cover with a wiping rag.
WARNING
3.
Remove any gummy deposits from the in line fuel filter (1) using clean fuel.
4.
Allow components to air dry.
ASSEMBLE IN LINE FUEL FILTER
1.
Install in line fuel filter element (4) into in line fuel filter cover (2).
2.
Tighten in line fuel filter base (3) into in line fuel filter cover (2) by turning ¼ turn clockwise.
WARNING
3.
Dispose of contaminated wiping rags in accordance with local procedures.
WARNING
4.
Clean up spilled fluid with a spill kit and dispose of spill kit waste in accordance with local procedures.
5.
Install RHIB engine cover. (WP 0297 00)
6.
Install RHIB battery negative lead terminal. (WP 0336 00)
7.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
