TM 55-1945-205-24-2
0328 00 3/4 blank
0328 00
WARNING
9.
Remove drain pan and dispose of contents in accordance with local procedures.
INSTALL FUEL FILTER HEAD
1.
Position new fuel filter head (2) against transom (10) and secure with two bolts (9). Tighten bolts (9).
2.
Install outlet hose (8) on elbow (7) and secure with clamp (6). Tighten clamp (6).
3.
Install inlet hose (5) on elbow (4) and secure with clamp (3). Tighten clamp (3).
WARNING
4.
Apply thin layer of oil on fuel filter gasket (11).
5.
Install new fuel filter (1) on fuel filter head (2) by turning clockwise until gasket (11) contacts fuel filter head (2).
6.
Using a fuel filter wrench, tighten fuel filter (1) ¾ to 1 additional turn.
WARNING
7.
Clean up spilled fluid with spill kit and dispose of spill kit waste in accordance with local procedures.
8.
Install RHIB battery negative lead terminal. (WP 0336 00)
9.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
