TM 55-1945-205-24-2 0051 00 3 0051 00 Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the damage on SF 361, Transportation Discrepancy Report. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies in accordance with applicable service instructions (e.g., for Army instructions, see DA PAM 738-750). Check to see whether the equipment has been modified. Nails, screws and fasteners present and in good condition. Nails, screws and fasteners that can be replaced or properly sealed. None. Mooring Bitt Container Exterior Minor rust, cracks, indentations, or splits that would not impair water proofing or serviceability of containers. Dents or bending that does not affect access door operation. Damage or bending that will not allow doors to open. Interior Equipment within the container remains stowed position. No broken, dented or cracked equipment. Minor dents or broken nails, screws and fasteners that can be replaced or properly sealed. Damage that will not allow for the stowage of mooring bitts. Hardware Hardware is operative and tight. Hardware is inoperative or loose. None. Personnel Shelter Exterior Minor rust, cracks, indentations, or splits that would not impair water proofing or serviceability of containers. Dents or bending that does not affect access door operation. Damage or bending that will not allow doors to open. Interior Items within the container have remained in stowed position. No broken, dented or cracked equipment. Dents or bending that does not affect access door operation. Damage or bending that will not allow doors to open. Hardware Hardware is operative and tight. Hardware is inoperative or loose. None. Rigid Hull Inflatable Boat (RHIB) Exterior No tears, cuts or gouges. Small tears no longer than one inch that can be easily patched. Perforations, excessive tears, closer than one inch to closure, or through all impregnated layers. Hardware Hardware is operative and tight. Hardware is inoperative or loose. None Table 1.  Inspection Criteria for Packaging. (Continued) COMPONENT ACCEPTABLE REPARABLE NONREPARABLE