TM 55-1945-205-24-2
0059 00 1/2 blank
0059 00
UNIT LEVEL MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
INTERMEDIATE SECTION NON-POWERED MODULE
FLEXOR ASSEMBLY
INSPECTION
INITIAL SETUP:
Tools
Tool Kit, General Mechanic’s (Rail and Marine) (Item 82, WP 0359 00)
Gloves, Men’s and Women’s (Leather Palm) (Item 27, WP 0359 00)
Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00)
Life Preserver, Vest (Item 38, WP 0359 00)
Helmet, Safety (Brown) (Item 33, WP 0359 00)
Personnel Required
Seaman 88K
INSPECT INTERMEDIATE SECTION NON-POWERED MODULE FLEXOR ASSEMBLY
WARNING
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
NOTE
The following procedure is typical for all flexors.
1.
Inspect flexors (1) for separation of the polyurethane material (2) in the center. If found, replace flexor (1).
2.
Inspect flexors (1) for cracks in the external weldments (3) on the ends. If found, replace flexor (1).
3.
Inspect installed flexors (1) for separation of the polyurethane material (2) in the center. If, found replace
flexor (1) after the exercise or operation is completed.
4.
Inspect installed flexors (1) for cracks in the external weldments (3) on the ends. If found, replace flexor (1).
END OF WORK PACKAGE
1
3
3
2
