TM 55-1945-205-24-20058 00 30058 002.Disassemble the female guillotine connector assembly.a.Remove guillotine connector bar (8).{1} Remove bolt (9), nut (10) and friction plate (11).{2} Pry up on the guillotine connector bar (8) using a crowbar.b.Remove guillotine connector bar (8) from guillotine lock housings (12).INSPECT AND REPAIR/REPLACE INTERMEDIATE SECTION NON-POWERED MODULE MALE AND FEMALE GUILLOTINE CONNECTORS1.Inspect male connector pins (5) for cracks, cuts or corrosion. If damaged, replace connector pins.2.Inspect deployment springs (7) for cracks, cuts or corrosion. If damaged, replace deployment springs.3.Inspect guillotine connector bars (1, 8) for cracks, cuts or corrosion. If damaged, repair or replace guillotine connector bars (1, 8).4.Inspect guillotine connector male and female lock housings (6, 12) for cracks, cuts or corrosion. If damaged, replace guillotine connector lock housings (6, 12).5.Inspect guillotine connector assembly friction plates (4, 11) for cracks, cuts or corrosion. If damaged, replace friction plates (4, 11).91081211
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
