TM 55-1945-205-24-2
0080 00 2
0080 00
WARNING
6.
Remove louver (10) from louver opening (11) and discard.
INSTALL GENERATOR CONTAINER COOLING DAMPER AND MOTOR
WARNING
1.
Position new cooling louver (10) in louver opening (11).
2.
Install twelve bolts (9), washers (8) and lock nuts (7) in louver (10) and tighten nuts (7).
3.
Remove two screws (1) from new louver motor cover (2).
4.
Remove louver motor cover (2) from new louver motor (3).
5.
Connect wires (4) to louver motor (3) and remove tags.
6.
Install conduit nut (5) on conduit (6) and tighten nut (5).
7.
Position louver motor cover (2) on louver motor (3).
8.
Install two screws (1) in louver motor cover (2) and tighten screws (1).
9.
Perform operational check of generator container cooling louver. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
