TM 55-1945-205-24-2
0103 00 1/2 blank
0103 00
DIRECT SUPPORT MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
HEATING AND AIR CONDITIONING SYSTEM SIDE ANGLE
REMOVAL AND INSTALLATION
INITIAL SETUP:
Tools
Tool Kit, General Mechanic’s (Item 81, WP 0359 00)
Personnel Required
Utilities Equipment Repairer 52C
REMOVE HEATING AND AIR CONDITIONING SYSTEM SIDE ANGLE
1.
Remove two screws (1) from each side angle (2).
2.
Remove side angle (2) from chassis.
3.
Tag and disconnect wires (3) from capacitor (4).
INSTALL HEATING AND AIR CONDITIONING SYSTEM SIDE ANGLE
1.
Connect wires (3) to capacitor (4) and remove tags.
2.
Position side angle (2) on chassis.
3.
Install two screws (1) through each side angle (2) and secure to chassis. Tighten screws (1).
END OF WORK PACKAGE
2
1
1
4
3
3
