TM 55-1945-205-24-20108 00 60108 00INSTALL HEATING AND AIR CONDITIONING SYSTEM FAN MOTOR1.Position fan motor (30) on partition (10).2.Install three bolts (29) in fan motor (30) and partition (10) and tighten bolts (30).3.Position fan (26) on fan motor shaft (27).WARNING4.Install spring clip (28).5.Tighten screw (25) securing fan (26) to fan motor shaft (27).WARNINGCAUTIONCare must be exercised when handling coil. Failure to comply could result in damage to equipment.6.Position coil (16) on base pan (24).7.Install two screws (23) in base pan (24) and tighten screws (23).8.Connect fan motor wires (20) to capacitor (21) and switch (22).9.Close hinged cover (19) upward.10. Install two screws (17) in the front control box (18) and tighten screws (17).11. Position condenser cover (14) on coil (16).12. Install condenser cover tabs (15) on coil (16).13. Position gusset (13) on condenser cover (14).14. Install screw (12) in gusset (13) and tighten screw (12).15. Install two screws (11) in partition (10) and tighten screws (11).16. Position fan motor ground wire (9) on partition (10).17. Install screw (8) in fan motor ground wire (9) and tighten screw (8).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
