TM 55-1945-205-24-2
0127 00 2
0127 00
2.
Remove four pan head screws (3) from light switch cover (4).
3.
Remove two pan head screws (5) from light switch cover (4).
4.
Remove switch cover (4) from light switch enclosure (6).
5.
Tag and disconnect wiring (7) from light switch assembly (8).
6.
Remove wiring harness (7) from light switch enclosure (6).
7.
Remove three hex head bolts (9) securing light switch enclosure (6) to the wall.
8.
Discard light switch enclosure (6).
INSTALL PERSONNEL SHELTER ROTARY BRASS LIGHT SWITCH
1.
Position and install three hex head bolts (9) to secure light switch enclosure (6) to the wall. Tighten bolts (9).
2.
Install wiring harness (7) in light switch enclosure (6).
3.
Connect wiring (7) and remove tags on light switch assembly (8).
4.
Install switch cover (4) on light switch enclosure (6).
5.
Install two pan head screws (5) in light switch cover (4). Tighten pan head screws (5).
6.
Install four pan head screws (3) in light switch cover (4). Tighten pan head screws (3).
7.
Install switch knob (2) on light switch (8).
8.
Install allen head screw (1) in light switch knob (2). Tighten allen head screw (1).
9.
Perform operational check of light switch. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
